A running toilet is easy to ignore, but a worn flapper can waste a large amount of water a day without anyone noticing. A toilet that rocks or leaks at the base is worse, because the water soaks into the subfloor below. Neither problem is seasonal, but basement toilets and those in rarely used guest rooms tend to be found last.
What usually needs fixing
- Constant running: a warped flapper, a chain that is too short, or a fill valve set too high so water spills into the overflow tube
- Phantom refills: the tank slowly leaks into the bowl and refills on its own every so often
- Weak flush: mineral deposits in the rim holes or siphon jet, or a partial clog
- Water on the floor: a failed wax ring, a cracked tank, or a loose supply connection
- Rocking: loose closet bolts or a corroded or broken flange underneath
Repair or replace the toilet?
Most toilet parts are inexpensive and standard. A cracked bowl or tank, though, cannot be safely patched. Toilets made before 1994 can use 3.5 gallons or more per flush, while current models use 1.6 gallons or less, so replacing an old one can make sense even if it still works.
After a leak at the base
When a toilet has been leaking at the floor for a while, the plumber pulls it, checks the flange and the subfloor for rot, and resets it on a new seal. Soft flooring around the base should be repaired before the toilet goes back down.
We book toilet repairs with plumbers serving Java, SD.